| HD-CVI is the new technology in the world of video surveillance. By simply replacing the equipment (Cameras and DVRs) in the analog infrastructure, the resolution can reach up to 1920X1080 (FULL-HD). In this way it is possible to obtain the same results as in the IP world but with a high cost containment.|
Warning: Analog and IP cameras are NOT compatible with HD-CVI DVRs, and HD-CVI cameras are not compatible with Analog DVRs.
This camera has a resolution of 2Megapixel 1080P.
Max 25fps @ 1080P
Max 50fps @ 720P
1 / 2.8 "2.1Megapixel CMOS image sensor
With the Sony IMX291 CMOS sensor it is possible to have color shots even in night mode.
Normally, when entering night mode, the color vision becomes black / white.
With the SENSOR present, and excluding the LEDs , night shots will be in color
Here are two examples of night vision both in the presence of total darkness and in the presence of artificial lights
By reactivating the LEDs, the camera will shoot at night, in black and white mode
2.7-12mm varifocal lens with motorized zoom
Quality IR illuminator with maximum range 100mt
| Protection level IP67 (Dust / Diving) |
IK 10 is the highest level of protection from direct damage. This allows the camera to be used even if there is a risk of vandalism
||With this camera it is possible to manage the OSD menu directly using a button on the coaxial cable. |
| This camera is equipped with 1 INPUT + 1 ALARM OUTPUT |
This camera has 1 AUDIO IN
Compatible with Setik MICS1 Microphones MICS2 MICS3
| Allows you to adapt the lens to Night / Day vision |
| The IR CUT FILTER is a mechanical filter that allows a correct display of images in daylight viewing conditions. It filters the typical infrared frequencies thus improving the image quality. In night conditions the filter is removed as it is necessary to capture the typical IR frequencies. |
| ULTRA WDR up to 120dB|
WDR (Wide Dynamic Range): It is the professional solution in cases where it is necessary to operate in conditions of high light / shadow contrast. Fundamental in the case of shots from the inside out, license plates, shaded spots or all situations where there is no homogeneity of light.
The higher the db value, the greater the camera's ability to manage the strong difference in the backlight present. Common WDRs usually reach 80db, the human eye is able to recognize a difference of up to 100db. This model reaches up to 120db managing very strong contrast levels.
This camera features optics with Auto-Iris
Optics of this type are able to automatically change their aperture taking into account factors such as brightness.
In fact, it shrinks in the presence of a lot of light and widens in the dark.
| BLC (Back Light Compensation) is one of the 3 possible steps in the management of images with contrast, typical situations are (entrances or exits from car parks, plates, special lights, entrances with shots from inside to outside, etc.) light is one of the most complex operations possible, the BLC function allows a discreet adaptation to these situations|
Click to enlarge
| AGC is an integrated signal amplifier that allows vision even in critical conditions. It is automatic and does not require specific settings. |
3D-NR is the most advanced version of NOISE REDUCTION management. Allows still images in low light and in motion. It is currently the most powerful solution to obtain maximum results in low light conditions.
| This camera was made of metal. |
| Power supply NOT included. |
This product is covered by a 24 month warranty.