Hikvision DS-2TD2636B-15 / P Bi-Spectrum Bullet Thermal PoE IP Camera Professional hybrid camera with body temperature measurement . NETD <40mk , Accuracy ± 0.5 ° C , Dual-lens , dual thermal optic (15mm) / visible 6mm and Dual-Sensor (1x Thermal Vanadium Oxide Uncooled Focal Plane Array + 1x CMOS 1 / 2.7 "). 4.0MP resolution for visible optic, H.265, 50MT IR LED, WDR 120db, Alarm, Audio, Reset, RS485, MicroSD slot, Hik-Connect compatible. IP66 protection, TVS6000. Ideal in airports, schools and hospitals for quarantine and Coronavirus inspection (Covid -19). Can be used with Black Body and Stand (not supplied) REQUEST DEDICATED QUOTATION
DS-2TD2636B-15 / P | HIKVISION PROFESSIONAL THERMAL IP CAMERA BODY TEMPERATURE MEASUREMENT
Hikvision Thermal Camera IP PoE Professional Body Temperature Measurement
Dual-Lens: (Thermal 15mm / 6mm visible) - NETD <40mk 25="" c="" b=""> / Accuracy ± 0.5 ° C - Dual Sensor (thermal / 1 / 2.7 ") - 4.0MP resolution (visible optics)
IR Illuminator 50M - Audio / Alarm - RS485 - MicroSD slot - Reset button - Hik-Connect connection - WDR 120dB
Ideal for detection of surface skin temperature and feverish states - Installations in airports, schools and hospitals - Can be used with Black Body and tripod (not included)
NEW FIRMWARE VERSION AVAILABLE! This thermometric camera is compatible with the new firmware v5.5.26 build 200507 which allows you to have the voice warning in Italian of "Temperature Anomaly" , if it is detected and the Absence of the mask signal , if people without it present themselves. in front of the detection device!
|
Thermal detection: What is it?
Any object with a temperature above absolute zero (-273.15 ° C) emits radiation. Infrared radiation is located between the visible spectrum (0.4-0.75um) and microwaves (> 15um). Even if we cannot see them we perceive them every day: the sun and fire are a source of infrared radiation that we can perceive through heat. Image quality depends on temperature difference and high differentials produce better images. Here is how we distinguish the temperature difference in thermal imaging. |
DS-2TD2636B-15 / P The bullet thermal imaging camera was designed to detect the high body temperature of the skin surface. Can be used for preliminary temperature screening in offices, factories, stations, airports and other public places.
- Resolution 384 × 288 in the thermal channel, high sensitivity sensor
- Temperature range: from 30 ° C to 45 ° C; Accuracy: ± 0.5 ° C
- Reliable alarm exception function
- 3D DNR, image detail improvement
- Audio alarm
POE (Power Over Ethernet): |
Double Optics on board: - Thermal optic with 384 × 288 15 mm resolution |
Thermal optics, NETD and Accuracy: |
Traditional Optics: |
Bi-spectrum fusion: Possibility of viewing in thermal, traditional, thermal / traditional Bi-Spectrum fusion or picture in picture (thermal vision in optical vision). In these last two modes, the details of the images will be clearer even if overlapping, useful as proofs, when necessary. The preview in these cases also reduces the bandwidth and there is no need to switch from thermal to optical or vice versa. |
Infrared IR illuminator: |
HIK-CONNECT Hik Connect allows you to control the device remotely |
WDR 120dB: WDR (Wide Dynamic Range): It is the professional solution in cases where it is necessary to operate in conditions of high contrast light / shadow. Fundamental in the case of shooting from the inside to the outside, plates, shaded spots or all situations where there is no homogeneity of light. The greater the value in db and the greater the camera's ability to manage the strong difference of the backlight present. The common WDR usually reaches 80db, the human eye is able to recognize a difference of up to 100db. This model reaches up to 120db managing very strong contrast levels. |
Day / Night: Allows you to adapt the lens to night / day vision, and the relative automatic management of the IR illuminator, when present. |
IR CUT FILTER (ICR): Mechanical filter that allows correct viewing of images in daytime viewing conditions. It filters the typical infrared frequencies thus improving the image quality. In night conditions the filter is removed as it is necessary to capture the typical IR frequencies. |
Alarm: 2 alarm inputs (0-5vDC) and 2 relay outputs , configurable alarm response action. |
Audio: Audio input: 1 audio interface 3.5 Microphone / Line in Line input: 2 at 2.4V [p-], output impedance: 1 KΩ ± 10% |
Archiving: MicroSD slot up to 256GB (not included). Alarm recording |
IP66 protection - outdoor: |
TVS 6000V protection: TVS 6000V protection against lightning |
Installation environments: Thermal cameras can be used in various scenarios. |
Data sheet
DS-2TD2636B-15 / P | ||
Room | ||
Thermal Module |
Image sensor | Vanadium Oxide Uncooled Focal Plane Arrays |
Max Resolution | 384 × 288 | |
Pixel Pitch | 17μm | |
Response waveband |
8 μm to 14 μm |
|
NETD | ≤ 40 mk (@ 25 ° C, F # = 1.0) | |
Focal length | 15 mm | |
IFOV | 1.13mrad | |
Field of view | 24.5 ° × 18.5 ° (H × V) | |
Min. Focusing Distance | 2.5 m | |
Openings | F 1.0 | |
Optical Module |
Max. Image Resolution | 2688 × 1520 |
Image Sensor | 1 / 2.7 "Progressive Scan CMOS | |
Min illumination | Color: 0.0089 Lux @ (F1.6, AGC ON), B / W: 0.0018 Lux @ (F1.6, AGC ON) | |
Shutter speed |
1 s to 1 / 100,000 s |
|
Lens (Focal Length) | 6 mm | |
Field of View | 51.7 ° × 28 ° (H × V) | |
WDR | 120 dB | |
Day & Night | IR cut filter with auto switch | |
Image Function |
Bi-spectrum image fusion |
Display the details of optical channel on thermal channel |
Picture in picture |
Partial display image of thermal channel on the full screen of optical channel |
|
Smart Function |
Temperature Measurement |
3 temperature measurement rule types, 21 rules in total (10 points, 10 areas, and 1 line). |
Temperature Range |
30 ° C to + 45 ° C |
|
Temperature Accuracy |
± 0.5 ° C |
|
Infrared |
IR Distance |
Up to 50 m |
Download
OTHER PRODUCTS RELATED TO THIS ITEM
Questions (0)
No customer questions for the moment.