Il DS-3E3752-H di Hikvision, è uno switch di rete 48 porte SFP Base-T 10/100/1000M (di cui 8 con interfaccia combo) + 4 porte SFP+ 10G/1G BASE-X SFP+. Integra 1 slot di espansione, 2 Slots con supporto x ventole, 2 slot per modulo alimentazione - Packet Forward rate: 252Mbps - Capacità complessiva di switching: 336Gbps - Prodotto di alta qualità.
3.860,93 €
9.192,70 € -58%
SWITCH DI RETE GESTITO HIKVISION - 48 PORTE BASE-T 10/100/1000M + 4 PORTE 10G/1G BASE-X SFP+ / DS-3E3752-H
48 Porte SFP Base-T 10/100/1000M (di cui 8 con interfaccia di tipo Combo) + 4 porte 10G/1G SFP+ - 1 slot di espansione, 2 Slots fan tray, 2 slot per modulo alimentazione - Capacità totale di switching 336Gbps - Packet Forwarding Rate: 252Mbps - 1G/10G/40G port aggregation - Dimensioni: 440×360×43.6 - Peso netto 7Kg.
Dettagli prodotto
- Switch di rete - Hikvision - DS-3E3752-H
- 48 porte Base-T 10/100/1000M (di cui 8x Combo interface)
- 4 Porte 10G/1G SFP+
- 1 slot di espansione
- 2 Slots fan tray
- 2 slot per modulo alimentazione
- Switching Capcity: 336Gbps
- Tasso di inoltro (PAcket Forwarding Rate) 252Mbps
- Alimentazione:
AC?100V?240V AC?50/60Hz
DC? -48V?-60V DC - Dimensioni: 440×360×43.6
- Peso netto dell'articolo: 7 kg
- Temperatura di funzionamento: 0ºC to 45ºC
- Umidità: 5% RH to 95% RH, non-condensing
Scheda tecnica
|
Item |
DS-3E3752-H |
|
|
|
Service ports |
48×10/100/1000BASE-T ports, 4×10G/1G BASE-X SFP+ ports |
|
|
|
Switching capacity |
336Gbps |
|
|
|
Packet forwarding rate |
252 Mpps |
|
|
|
Dimensions (W×D×H)?mm? |
440×360×43.6 |
|
|
|
Input voltage |
AC?100V?240V AC?50/60Hz DC? -48V?-60V DC |
||
|
Power consumption (full configuration) |
Single AC input: 87 W Single AC input: 112 W Single AC input: 88 W Dual AC inputs: 93 W Single DC input: 89 W Dual AC inputs: 91 W Dual AC inputs: 116 W Single DC input: 88 W Single DC input: 113 W Dual DC inputs: 95 W Dual DC inputs: 122 W Dual DC inputs: 96 W |
||
|
Weight |
≤7.0 kg |
|
|
|
Operating temperature |
0ºC to 45ºC (32°F to 113°F) |
||
|
Operating humidity |
5% RH to 95% RH, non-condensing |
||
|
Layer 2 ring network protocol |
STP/RSTP/MSTP |
|
VLAN |
Port-based VLAN MAC-based VLAN Protocol-based VLAN QinQ and selective QinQ |
|
Port features |
IEEE802.3x flow control (full duplex) Storm control based on port rate percentage PPS/BPS-based storm contro |
|
IP routing |
Static routing RIPv1/v2 and RIPng OSPFv1/v2/v3 BGP and BGP4+ for IPv6 |
|
Multicast |
IGMP Snooping /MLD Snooping ?Multicast VLAN |
|
SDN/Openflow |
OpenFlow 1.3 |
|
VXLAN |
VXLAN Layer 2 switching VXLAN routing switching VXLAN gateway |
|
Link aggregation |
1G/10G/40G port aggregation Static aggregation/Dynamic aggregation Cross-device aggregation |
|
Mirroring |
Port mirroring RSPAN Traffic mirroring |
|
Stack |
Distributed device management, distributed link aggregation, and distributed resilient routing Stacking through standard Ethernet interfaces Local device stacking and remote device stacking |
|
ACL |
Packet filtering at L2 ?L4 Traffic classification based on source MAC addresses, destination MAC addresses, source IPv4/IPv6 addresses Time range-based ACL VLAN-based ACL Bidirectional ACL |
|
Security |
Hierarchical user management and password protection Guest VLAN 802.1X authentication, centralized MAC authentication RADIUS authentication MAC address learning limit Port isolation IP Source guard Dynamic ARP inspection, preventing man-in-the-middle attacks and ARP DoS attacks IP/Port/MAC binding |
|
QoS |
802.1p DSCP remarking Flexible queue scheduling algorithms based on ports and queues, including SP, WRR, WFQ and SP+WRR Committed access rate (CAR) Packet redirection Port rate limit (receiving and transmitting) |
|
Management and maintenance |
Configuration through CLI, Telnet, and console port Ping, Tracert Loading and upgrading through XModem/FTP/TFTP SNMPv1/v2/v3 and Web-based NMS Remote monitoring (RMON ) alarm, event, and history recording NTP |
Ulteriori dettagli
Download
Domanda (0)
Non ci sono domande dei clienti per il momento.