Neu
130273.345.WH1 #130273 - The Ajax Curtain Outdoor Mini Jeweller is an outdoor and indoor curtain sensor with dual PIR and K-band microwave technology, capable of detecting motion up to 5 meters with a vertical angle of 100° and a horizontal angle of 15° . Thanks to the SmartDetect algorithm and animal immunity up to 100 cm, it minimizes false alarms. It offers wireless communication between Jeweller and Wings up to 1,700 m with encryption and anti-jamming protection. It features anti-masking, tamper protection and easy installation via SmartBracket , with a battery life of up to 3 years and IP55 protection. Ajax
INSTALLATEUR FINDEN
TOTALER AUSVERKAUF ×
CLEARANCE SALE!
Take advantage of our must-see outing offers.
Discover the promo >>
142717.359.WH1 | DUAL-TECH WIRELESS CURTAIN MOTION DETECTOR WITH EXTENDED PHOTO VERIFICATION CAPABILITIES - FOR OUTDOOR INSTALLATION AT A HEIGHT OF 2-4m
The CurtainCam Outdoor HighMount (PhOD) Jeweller, 142717.359.WH1, is an advanced dual-technology outdoor curtain sensor designed to offer precise detection up to 15 meters thanks to PIR and microwave sensors and a wide 78° vertical angle. It integrates a camera with photo verification up to 640x480 px, IR for night vision and first image transmission in less than 9 seconds, ensuring immediate control of the protected area. Equipped with anti-sabotage, encryption, spoofing protection and Jeweller/Wings communication up to 1,700 m, it ensures maximum reliability with quick installation and a battery life of up to 3 years.
Main specifications:
- Detection up to 15m with dual PIR + microwave
- HDR photo verification up to 640×480 px with integrated IR
- Anti-masking, tamper, magnetometer and spoofing protection
- Wireless communication up to 1,700 m with encryption
- First photo in <9 seconds="" up="" to="" 5="" images="" per="" event="" p="">
- Battery life up to 3 years with 6 CR123A batteries
Further details
✅ Jeweler Communication :
It ensures secure and stable transmission up to 1,700 m thanks to advanced encryption, constant device status polling and frequency hopping, which reduces the risk of interference and jamming attempts.
✅ Wings Communication:
Dedicated to photo verification management, it ensures rapid and secure image sending with an optimized and redundant flow, allowing the first photo to be received in less than 9 seconds even in critical environmental conditions.
It ensures secure and stable transmission up to 1,700 m thanks to advanced encryption, constant device status polling and frequency hopping, which reduces the risk of interference and jamming attempts.
✅ Wings Communication:
Dedicated to photo verification management, it ensures rapid and secure image sending with an optimized and redundant flow, allowing the first photo to be received in less than 9 seconds even in critical environmental conditions.
✅ Detection:
It combines dual technology with 2 PIR sensors and a K-band microwave sensor, offering a range of up to 15 m, a vertical angle of 78° and an intelligent filter to reduce false alarms, also including pre-alarm and temperature compensation.
It combines dual technology with 2 PIR sensors and a K-band microwave sensor, offering a range of up to 15 m, a vertical angle of 78° and an intelligent filter to reduce false alarms, also including pre-alarm and temperature compensation.
✅ Photo verification:
It integrates a camera with a resolution of up to 640×480 px, HDR for clearer images and IR illuminator for vision in low light conditions, allowing the sending of series of up to 5 photos to accurately evaluate each event.
It integrates a camera with a resolution of up to 640×480 px, HDR for clearer images and IR illuminator for vision in low light conditions, allowing the sending of series of up to 5 photos to accurately evaluate each event.
✅ Anti-sabotage protection:
Advanced anti-masking system, opening tamper, magnetometer to detect unauthorized movements and connection loss detection, ensuring a high level of security against hostile interventions or tampering .
Advanced anti-masking system, opening tamper, magnetometer to detect unauthorized movements and connection loss detection, ensuring a high level of security against hostile interventions or tampering .
✅ Effortless installation and maintenance:
Designed for quick assembly via QR code and app configuration, it is installed on an orientable support with an 87° horizontal angle, without the need to disassemble the device and with a pre-installed battery for immediate operation for up to 3 years.
Designed for quick assembly via QR code and app configuration, it is installed on an orientable support with an 87° horizontal angle, without the need to disassemble the device and with a pre-installed battery for immediate operation for up to 3 years.
Technical data sheet
| 142717.359.WH1 | |
| Communication | |
| Jeweler communication technology | Proprietary wireless communication technology to transmit commands, alarms, and events. Key features:
|
| Frequency bands | 866.0–866.5 MHz 868.0–868.6 MHz 868.7–869.2 MHz 905.0–926.5 MHz 915.85–926.5 MHz 921.0–922.0 MHz Depends on the sales region. |
| Maximum effective radiated power (ERP) | up to 25 mW Automatic power control to reduce power consumption and radio interference. |
| Radio signal modulation | GFSK |
| Radio communication range | up to 1,700 m up to 5,550 ft Between the detector and a hub (or a range extender) in an open space |
| Encrypted communication | All stored and transmitted data are protected by block encryption featuring a dynamic key. |
| Frequency hopping | To prevent radio interference and jamming. |
| Wings communication technology | Proprietary wireless communication technology for uploading firmware updates. Key features:
|
| Frequency bands | 866.0–866.5 MHz 868.0–868.6 MHz 868.7–869.2 MHz 905.0–926.5 MHz 915.85–926.5 MHz 921.0–922.0 MHz Depends on the sales region. |
| Radio communication range | up to 1,700 m up to 5,550 ft Between the detector and a hub (or a range extender) in an open space |
| Encrypted communication | All stored and transmitted data are protected by block encryption featuring a dynamic key. |
| Frequency hopping | To prevent radio interference and jamming. |
| Detection | |
| Sensitive elements | 2 × PIR sensors 1 × K-band microwave sensor K-band microwave sensor to prevent false alarms caused by thermal interference. Operating frequency: 24 GHz. |
| Motion detection distance | up to 15 m up to 49 ft When installed at a height of 2-4 m. When installed at a height of 6.6–13.1 ft. Depends on the sensitivity level adjusted in the device settings. |
| Motion detection angles | horizontal: 7° vertical: 73° |
| Pre-alarm motion detection zone angles | horizontal: 43° vertical: 88° To catch an intruder on photos, the device can start taking photos when a threat is detected in the pre-alarm detection zone. However, the device does not raise an alarm if the intruder never crosses the main detection zone. |
| Motion detection speed | 0.3 to 2.0 m/s 1 to 6.6 ft/s The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility. |
| Sensitivity | 3 levels Adjusted by a PRO or a user with admin rights in the Ajax apps. |
| False alarm prevention | SmartDetect Software algorithm. |
| Temperature compensation | Effective motion detection at temperatures from −25 °C to +60 °C. (−13 °F to +140 °F) Effective motion detection at temperatures from −13 °F to 140 °F. |
| Photo verification | |
| Photo by alarm | The built-in camera activates if the detector is armed and motion is detected. |
| Photo on demand | A user takes pictures at any time or when the detector is armed (depending on settings). The feature is disabled by default. |
| Photo by scenario | The detector takes pictures automatically when other Ajax detectors are triggered. The feature is not configured by default. |
| Photo by schedule | The detector automatically takes photos at the specified time. The feature is not configured by default. |
| Photo by arming/disarming | The detector automatically takes photos when the security state is changed. |
| Adjustable photo resolution | 640 × 480 px 320 × 240 px (by default) Adjusted by a PRO or a user with admin rights in Ajax apps. |
| Camera viewing angles | horizontal: 121° vertical: 92.5° |
| HDR image | Improves detail accuracy in bright and dark scenes. |
| IR illumination | To take photos in low-light conditions. |
| Series of pictures | from 1 to 5 images with a resolution of 320 × 240 px from 1 to 3 images with a resolution of 640 × 480 px Adjusted by a PRO or a user with admin rights in Ajax apps. |
| Photo delivery time | up to 9 s for 320 × 240 px resolution up to 20 s for 640 × 480 px resolution Photo delivery time depends on the image resolution selected in the device settings. |
| Recommendations | It is recommended to install the detector at a height of 2–4 m. It is recommended to install the detector at a height of 6.6–13.1 ft. The Pet immunity feature is not available for this device. The device is designed for outdoor and indoor use |
| Sabotage protection | |
| Tamper alarm | Notifications on attempts to detach the detector from the surface or remove it from the mounting panel. |
| Magnetometer | detects attempts to tilt or shift the detector or detach it from the surface |
| Anti-masking system | detects attempts to block the detector view |
| Accelerometer | alarm when the detector is moved Must be activated when the detector is installed on third-party brackets. |
| Holding screw | To secure the detector on SmartBracket. |
| Protection against spoofing | Device authentication |
| Communication loss detection | after 36 s Detection time depends on Jeweler or Jeweler/Fibra settings. |
| Main Power Supply | |
| Battery | 6 × CR123A Pre-installed. |
| Type | type C |
| Calculated battery life | up to 3 years |
| Operating voltage range | 3.8−6.5 V⎓ |
| Nominal operating voltage | 6 V⎓ |
| Quiescent detector's current consumption at nominal voltage | 45 μA |
| Maximum detector's current consumption at nominal voltage | 1200 mA |
| Full battery capacity | 4,800 mAh |
| Low battery voltage | 4.2 V⎓ |
| Low battery recovery voltage | 5.0 V⎓ |
| End-of-life battery voltage | 3.8 V⎓ Device is switched off. |
| End-of-life battery capacity | 300 mAh |
| Manufacturer | Huiderui |
| Optional power supply | |
| External supply operating voltage | 12−24 V⎓ The batteries serve as a backup when an external power supply is connected. |
| Enclosure | |
| Dimensions with the swivel mount | 234 × 98 × 275 mm 9.21" × 3.86" × 10.83" |
| Dimensions of detector with angle mount | 234 × 98 × 137 mm 9.21" × 3.86" × 5.39" |
| Weight of detector | 1.109 g 2.44 lb |
| Weight of angle mount | 620 g 1.37 oz |
| Operating temperature range | from −25 °C to +60 °C from –13 °F to +140 °F |
| Operating humidity | up to 95% |
| Protection class | IP55 |
| Color | White |
| Complete set | CurtainCam Outdoor HighMount (PhOD) Jeweller 6 × CR123A battery (pre-installed) SmartBracket mounting panel Swivel mount Hood Installation kit Quick start guide |
All our products are in conformity with the in force CE normative (read here). To ask for a copy of the certification
fill out this form