Il DS-3E1518P-EI/M di Hikvision, è uno switch di rete gestito con 16 Porte PoE Gigabit (IEEE 802.3at/af),1 porte RJ45 Gigabit e 1 Porta fibra ottica Gigabit- Protezione dai fulmini 6kV - MAC Address Table 8K - Capacità di switching 56Gbps - Cache interna 4,1Mbits - Packet Forward Rate 41,66 Mbps - Distanza di trasmissione 300m - Fabbricato in metallo - Per montaggio a muro o a scrivania - Tecnologia PoE Watchdog.
SWITCH DI RETE GESTITO - 16 PORTE ETHERNET POE GIGABIT - 1 PORTA GIGABIT RJ45 -1 PORTA FIBRA OTTICA GIGABIT- POE WATCHDOG - TRASMISSIONI A 300M - HIKVISION - DS-3E1518P-EI/M
Switch ethernet gestito - Hikvision - DS-3E1518P-EI/M
16 Porte PoE Gigabit (IEEE 802.3af,IEEE 802.3at) - 1 Porta Gigabit RJ45 (per uplinking)-1 Porta Fibra Ottica Gigabit Protezione dai fulmini 6kV - MAC Address Table 8K - Capacità di switching 56Gbps - Cache interna 4,1Mbits - Packet Forward Rate 41,66 Mbps - Distanza di trasmissione 300m - Fabbricato in metallo - Per montaggio a muro o a scrivania - Tecnologia PoE Watchdog. - Alimentazione: 100~240 V AC, 50/60 Hz, Max. 2.5 A
Dettagli prodotto
- Switch di rete - Gestito - HIKVISION - DS-3E1518P-EI/M
- Porte: 16 porte Gigabit PoE (IEEE 802.3af, IEEE 802.3at), 1 porta Gigabit RJ45 per uplinking, 1 porta in fibra ottica Gigabit.
- Protezione dai fulmini: 6kV.
- Tabella degli indirizzi MAC: 8K.
- Capacità di switching: 56Gbps.
- Cache interna: 4,1 Mbits.
- Velocità di trasmissione dei pacchetti (Packet Forward Rate): 41,66 Mbps.
- Distanza di trasmissione: 300m.
- Materiale di fabbricazione: Metallo.
- Montaggio: Montaggio a parete o su scrivania.
- Tecnologia PoE Watchdog: Supportata.
- Alimentazione: 100~240 V AC, 50/60 Hz, Max. 2.5 A.
- Budget PoE: 130W.
- Dimensioni: 440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'')
- Case fabbricato in metallo
- Peso: 2,7kg
- Temperatura di funzionamento: 0 °C to 45 °C
Scheda tecnica
|
General |
|
|
Shell |
Metal material |
|
Net Weight |
2.7 kg (5.9 lb) |
|
Gross Weight |
2.9 kg (6.4 lb) |
|
Dimensions (W × H × D) |
440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'') |
|
Operating Temperature |
0 °C to 45 °C (0 °F to 113 °F) |
|
Storage Temperature |
-40 °C to 85 °C (-40 °F to 185 °F) |
|
Operating Humidity |
5% to 95% (no condensation) |
|
Relative Humidity |
5% to 95% (no condensation) |
|
Power Supply |
100~240 V AC, 50/60 Hz, Max. 2.5 A |
|
Installation Mode |
Rack (equipped with mounting ears) |
|
Max. Power Consumption |
150 W |
|
Power Consumption in Idle |
20 W |
|
Surge Protection |
6 kV |
|
Network Parameters |
|
|
Ports |
16 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port |
|
MAC Address Table |
8 K |
|
Switching Capacity |
56 Gbps |
|
Packet Forwarding Rate |
41.66 Mpps |
|
Internal Cache |
4.1 Mbits |
|
PoE Power Supply |
|
|
PoE Standard |
IEEE 802.3af,IEEE 802.3at |
|
PoE Power Pin |
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
|
PoE Port |
PoE: Ports 1 to 16 |
|
Max. Port Power |
30 W |
|
PoE Power Budget |
130 W |
|
Software Function |
|
|
Long Range |
Ports 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
|
Port Isolation |
Ports 1 to 16: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
|
PoE Watchdog |
Ports 1 to 16: auto detect and restart the cameras that do not respond. |
|
Link Aggregation |
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups. |
|
Loop Prevention |
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP. |
|
VLAN |
VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. |
|
HPP |
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: |
|
System Maintenance |
Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating. |
|
Approval |
|
|
EMC |
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
|
Safety |
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
|
Chemistry |
CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006) |
Ulteriori dettagli
Download
Questions (0)
No customer questions for the moment.