Dahua 1080P 4in1 Starlight Motorized PoC Camera

POC - POWER OVER COAX:

This new technology makes it possible to power common coaxial cameras directly through the video cable, on which the signal is sent using the same transmission medium. This technical concept is very similar to PoE, already widely used on IP devices and even earlier on old analog telephones.

The coverage in terms of distance of this technology depends on the quality of the cable and the power supply required by the camera, in any case the guaranteed distances are greater than those of the typical 12V power supplies, which have a much greater loss.

Below you will find a purely indicative table of Dahua:

2Megapixel FULL-HD 1080P resolution, means 5 times the resolution of a common D1 camera:
Max 25fps @ 1080P Remarkable flui dity .

1 / 2.8 "Sony Exmor IMX291 sensor with STARLIGHT technology.

Low brightness, visibility at 0.0001Lux, color vision even in night mode

With the addition of the STARVIS feature we have significant advantages:

- Backlit structure with 2.9 µm-square unit pixels

- High sensitivity (two or more times greater than other products on the market)

- Increased sensitivity in the vicinity of an area covered by infrared light

- Supports WDR (WDR multiple exposure, DOL-WDR)

- Versatile interface (parallel CMOS, low voltage LVDS serial, MIPI CSI-2)

With the Sony CMOS sensor it is possible to have color shots even in night mode.

Normally, when entering night mode, the color vision becomes black / white.

With the SENSOR present, night shots will be sharp and in color

Infrared illuminator with 4 (larger) DOT LEDs with approximate range of about 60mt.
Improve night vision.

This camera is also equipped with SMART IR technology.
Through this technology , the light emitted by the LEDs is adapted according to the framed object.

OSD (ON SCREEN DISPLAY) allows you to define masked areas, image correction, ATR, Day / Night sensitivity, Shutter speed, White balance, light compensation and much more ...

The OSD menu is multi-language

Multi-Technology:

The camera can switch from HDCVI to HDTVI, AHD or Analog via OSD Menu or UTC controller (not included).

The IR CUT FILTER is a mechanical filter that allows a correct display of images in daylight viewing conditions, filtering the typical infrared frequencies. This improves the image quality. In night conditions the filter is removed as it is necessary to capture the typical IR frequencies.

BLC (Back Light Compensation): it is one of the 3 possible steps in the management of images with contrast, typical situations are: entrances or exits from parking lots, number plates, special lights, entrances with shots from inside to outside, etc. Light compensation is one of the most complex operations possible, the BLC function allows a discreet adaptation to these situations

AGC is an integrated signal amplifier that allows vision even in critical conditions. It is automatic and does not require specific settings.

3D-NR is the most advanced version of NOIS REDUCTION management. Allows still images in low light and in motion. It is currently the most powerful solution for obtaining maximum results in low light conditions

This product is covered by a 24 month warranty.