Hikvision DS-2DE4A425IWG-E IP PoE Dome PTZ camera - 4MP 2560x1440p resolution, 4.8-120mm varifocal lens with 25x zoom, 1/2.8" CMOS sensor, H.265+. Day&Night (ICR), 50M IR illuminator, Triple Stream, Intelligence artificial with Face Detection , Video Analysis - WDR 120dB , ROI, Defog, 3D DNR, MicroSD Slot (256GB - NOT INCLUDED ) , Auto Tracking, Audio, Alarm, IP66 and TVS6000 outdoor protection against lightning, Hik-Connect access.
€736.54
€1,712.88 -57%
DS-2DE4A425IWG-E | HIKVISION IP DOME CAMERA 4MP POE H.265+ - IR 50 METERS - AUDIO - ALARM - FACE DETECTION
Hikvision IP PoE Dome Camera - DS-2DE4A425IWG-E
Resolution: 4MP 2560x1440p - 4.8-120mm varifocal lens - 1/2.8" CMOS sensor - H.265+ codec - Triple Stream -
IR illuminator up to 50M - Day/Night(ICR) - WDR 120dB, ROI, 3DNR, Defog, BLC, HLC - Video Analysis - Artificial Intelligence with Face Detection - Audio 1in/1out - Alarm 2in/2out - Smart Tracking - Auto tracking - Reset button - Power supply NOT included - 256GB MicroSD slot (not included) - 24 month warranty
DarkFighter Technology: | |
| POE (Power Over Ethernet): The advantage of a PoE camera is evident, it allows it to be powered with the same cable with which it communicates without carrying additional power cables and without having to install a separate power system, a PoE camera guarantees constant voltages and simple installation | |
| Resolution: This camera features a resolution of 4MP! ( 2560 × 1440) 1/2.8” 4MP progressive scan CMOS image sensor | |
Optics: | |
H.265+ compression 
An intelligent algorithm self-developed by Hikvision which can greatly reduce the bitrate of video based on standard H.265 codec. Hikvision's H.265+ reduces transmission bandwidth and required storage capacity without impacting video quality, thanks to three key technologies: prediction coding, noise suppression and flexible bit rate control. Optimized for multiple surveillance scenarios, it allows for greater use of ultra HD surveillance cameras, such as 8 MP and 12 MP cameras. | |
Infrared IR Illuminator: | |
Smart function : There camcorder is equipped with smart functions such as: - Motion detection | |
PTZ Movement Range (Pan): 0° to 360° Movement Range (Tilt): -5° to 90° PanSpeed Pan speed: configurable from 0.1° to 300°/s; preset speed: 350°/s Tilt Speed: configurable from 0.1° to 160°/s, preset speed 200°/s Proportional Zoom: Yes Presets: 300 Preset Freezing: Yes Patrol Scan: 8 patrols, up to 32 presets for each patrol Pattern Scan: 4 pattern scans, record time over 10 minutes for each scan Park Action: Preset, pattern scan, patrol scan, auto scan, tilt scan, random scan, frame scan, panorama scan 3D Positioning: Yes PTZ Status Display: Yes Scheduled Task: preset, pattern scan, patrol scan, auto scan, tilt scan, random scan, frame scan, panorama scan, dome reboot, dome adjust | |
| WDR 120dB (Wide Dynamic Range): WDR (Wide Dynamic Range): It is the professional solution in cases where you need to operate in conditions of high light/shadow contrast. Fundamental when shooting from inside to outside, license plates, shadowed points or all situations where there is no homogeneity of light. The higher the db value, the greater the camera's ability to manage the strong difference in backlighting present. Common WDRs usually reach 80db, the human eye is able to recognize a difference of up to 100db. This model reaches up to 120db managing very strong contrast levels.  | |
| ROI (Region Of Interest): The images deriving from IP cameras are "compressed", therefore the quality is set during the recording phase. Especially on cameras with a very high resolution, it is often necessary to reduce the quality in order to guarantee reduced bandwidth occupation and record a greater number of days or cameras. The ROI allows you to define areas where you can set higher quality (for example a door, the area where the license plate usually passes, an exit, etc.). In that area I can set a higher quality , thus guaranteeing greater image definition.  | |
| Day/Night: It allows you to adapt the lens to night/day vision, and the relative automatic management of the IR Illuminator, when present.
| |
| IR CUT FILTER (ICR): Mechanical filter that allows correct viewing of images in daytime viewing conditions. It filters the typical infrared frequencies, thus improving image quality. In night conditions the filter is removed as it is necessary to capture the typical IR frequencies.  | |
| BLC (Back Light Compensation): it is one of the 3 possible steps in managing images with Contrast, typical situations are (Entries or exits from car parks, license plates, particular lights, entrances with shots from inside to outside, etc.) light compensation is one of the most as complex as possible, the BLC function allows discreet adaptation to these situations | |
| AGC (Automatic Gain Control): integrated signal amplifier that allows viewing even in critical conditions. It is automatic and does not require specific settings. | |
Smart Tracking | Manual tracking, auto-tracking |
Deep Learning Function | |
Face Capture | Detects up to 5 faces simultaneously, Supports detecting, tracking, capturing, grading, selecting of face in motion, and outputs the best face picture |
General | |
Power | 12VDC, Max. 24W; PoE (802.3at) |
Dimension | Ø 169 mm × 161 mm (Ø 6.65" × 6.34") |
Weight | Approx. 2.45 kg (5.40 lb.) |
Operating Condition | -30 °C to 65 °C (-22 °F to 149 °F). Humidity 90% or less (non-condensing) |
General Function | Mirror, password protection |
Approval | |
Protection | IP66 (IEC 60529-2013), TVS 6000V lightning protection, surge protection and voltage transient protection |
Further details
Downloads
OTHER PRODUCTS RELATED TO THIS ITEM
Questions (0)
No customer questions for the moment.