Starlight PTZ IP POE ONVIF 2MP Full HD Camera - 4.5-144mm 32x - Artificial Intelligence

The advantage of a PoE camera is evident, it allows it to be powered with the same cable with which it communicates without carrying additional power cables and without having to install a separate power supply system, a PoE camera guarantees constant voltages and simple installation

This camera supports the PoE+ (802.3at) standard.

All Onvif , the absolute standard for IP cameras, being Onvif guarantees compatibility with any modern recording system. NOT being Onvif means having a camera for its own sake that can never be used together with recording systems

This camera is ONVIF® compatible

AI | Artificial intelligence
This camera features Artificial Intelligence on board
This means that it has a wide range of advanced features such as:

- Perimeter protection: Intrusion, line crossing etc...

- Face detection

- Auto-tracking: The system will identify the objects moving in a given video surveillance area and will automatically enlarge it for a better view of the tracked object.

- SMT

- Quick picks

This camera features a resolution of 2 Megapixels 1920x1080

Smart H.265+

Smart H.265+ is the optimized implementation of H.265 codec that uses scene-adaptive coding strategy, dynamic GOP, dynamic ROI, flexible multi-frame reference structure and intelligent noise reduction to deliver high-quality video without straining the network.

Smart H.265+ greatly reduces bit rate and storage requirements compared to standard H.265 compression

1/2.8" STARVIS sensor with STARLIGHT technology.

Low brightness, color vision even in night mode

With the addition of the STARVIS feature we have significant advantages:

- Backlit structure with 2.9 µm-square unit pixel

- High sensitivity (two or more times greater than other products on the market)

- Increased sensitivity in the vicinity of an area covered by infrared light

- Supports WDR (multiple exposure WDR, DOL-WDR)

- Versatile interface (CMOS parallel, low voltage LVDS serial, MIPI CSI-2)

With the Sony CMOS sensor it is possible to have color shots even in night mode.

Normally, when entering night mode, the color vision becomes black/white.

With the SENSOR present, night shots will be clear and in colour

This camera features a triple stream of video:

Main stream: 1080p/1.3M/720p@ (1–25/30 fps)
Sub stream 1: D1/VGA/CIF@ (1–25/30 fps)
Sub stream 2: 720p@ (1–25/30 fps)

IR LED illuminator with maximum range up to 150 meters! (4 illuminators)

This camera is also equipped with SMART IR technology.

Through this technology , the light emitted by the LEDs is adapted according to the object framed.

PTZ Generic Functions:

Pan/Tilt Range
Pan: 0° to 360° endless
Tilt: –15° to +90°, auto flip 180°

Manual Control Speed
Pan: 0.1°/s–300°/s;
Tilt: 0.1°/s–200°/s

Speed presets
Pan: 400°/s;
Tilt: 300°/s

Presets
300

Tours
8 (up to 32 presets per tour)

Patterns
5

Scan
5

Power-off Memory
Yes

Idle motion
Pattern;Preset;Scan;Tour

PTZ Protocol
DH-SD Pelco-P/D (auto recognition)

The IR CUT FILTER is a mechanical filter that allows correct viewing of images in daytime viewing conditions, filtering the typical infrared frequencies, thus improving image quality. In night conditions the filter is removed as it is necessary to capture the typical IR frequencies.

BLC (BACK LIGHT COMPENSATION) is one of the 3 solutions for managing images with contrast. The BLC function allows a discreet adaptation to all those situations where shooting is difficult (entries or exits of car parks, shooting of license plates, presence of special lights, etc...).

Possibility to insert Micro SD up to a maximum of 512GB (not included)

Protection level IP67 ( Dust / Immersion )

It also features TVS 6kV lightning protection!

Ideal product for video surveillance systems set up in outdoor environments!

IK 10 is the highest level of protection from direct damage. This allows the use of the camera even if there is a risk of vandalism

24VDC power supply included.

Also includes wall mount bracket.