DS-K5671-3XF / ZU Hikvision Reader Access Control for face detection, body temperature and mask identification . 7 "LCD touch screen display with 2MP Double Optical camera . Accuracy ± 0.5 ° C (without black body), up to 50,000 faces and 100,000 events, multiple authentication. Can be installed on hikvision and third party turnstiles via IO or Wiegand output. Useful for monitor the sanitary conditions of people, in periods of severe epidemics or simply for prevention. ASK FOR A DEDICATED QUOTE
This product can be purchased with a TAX CREDIT of 50%, according to Legislative Decree 23/2020 art. 30. |
DS-K5671-3XF / ZU | HIKVISION ACCESS CONTROL READER FACE DETECTION / BODY TEMPERATURE / MASK
The Hikvision DS-K5671-3XF / ZU Hikvision facial recognition terminal is a type of access control device with integrated fever screening function. Compatible with Hikvision turnstiles or third-party turnstiles via IO or Wiegand outputs, it is able to detect body temperature and upload any temperature anomalies to the management center. Easily installed in companies, stations, factories, schools and campuses.
Thermal Sensing: What is it?
Any object with a temperature above absolute zero (-273.15 ° C) emits radiation. Infrared radiation lies between the visible spectrum (0.4-0.75um) and microwaves (> 15um). Even if we cannot see them, we perceive them every day: the sun and fire are sources of infrared radiation that we can perceive through heat. Image quality depends on the temperature difference and high differentials produce better images. Here's how we distinguish the temperature difference in thermal imaging. |
MAIN FEATURES:
- Compatible with Hikvision turnstiles
- Communicates with third party turnstiles via IO or Wiegand exit
- Support uncooled Vanadium Oxide sensor to measure temperature
- Temperature measurement range: 30 ° C to 45 ° C (86 ° F to 113 ° F), accuracy ± 0.5 ° C without black body
- Detection distance: 0.3 to 2m
- Fast temperature measurement mode: Detects faces and skin surface temperature without authentication / identification
- Multiple authentication mode with temperature measurement
- Mask presence signal
- Mask obligation report: If the detected face does not wear a mask, the device will send a voice reminder.
- The results of the temperature measurement are shown on the authentication page
- Voice prompt when fever is detected
- Configurable door status (open / closed) with fever detection
- Transmits temperature information online and offline to client software via TCP / IP communication and saves the data to client software
- High performance processor with deep learning algorithm
- Up to 50,000 faces and 100,000 events
- Face recognition duration ≤ 0.2 s / user; Accuracy ≥ 99%
- Transmits and saves detected results and captured images to client software and others
- NTP, manual time synchronization, and auto synchronization
- Watchdog design for device protection
- Supports up to 6 attendance statuses, including check in, check out, break start, break end, overtime start, overtime end
- Audio command for results authentication
Can be installed on Hikvision and third party turnstiles!
|
Data sheet
DS-K5671-3XF / ZU | ||
Operation system | Linux | |
Temperature measurement |
Sensor | Vanadium Oxide uncooled sensor |
Resolution | 120 × 160 | |
Frame rate | 25 fps | |
Temperature range |
30 ° C to 45 ° C (86 ° F to 113 ° F) |
|
Temperature accuracy | ± 0.5 ° C, without black body calibration | |
Measuring distance | 0.3 to 2 m | |
Screen |
Screen | 7 inch touch screen |
Resolution | 1024 × 600 | |
Camera indicator |
2 MP dual-lens camera |
|
Face |
Recognition mode |
1: 1 and 1: N |
Face recognition duration |
< 0.2 s |
|
Face recognition distance |
0.3 to 2 m |
|
Face anti-spoofing |
Support |
|
Card |
Face capacity |
50,000 |
Event capacity | 10000 | |
Communication | TCP / IP, Wi-Fi | |
Interface | LAN × 1, RS-485 × 1, Wiegand × 1, USB × 2, IO output × 1, IO input × 2, lock × 1, door contact × 1, TAMPER × 1 | |
Other | Audio prompt | Support |
Two-way audio | Support | |
Power supply | 12 VDC / 2 A | |
Working humidity | 10 to 90% (no condensing) | |
Working temperature | 0 ° C to 50 ° C (32 ° F to 122 ° F) |
Further details
BLACK BODY? WHAT IS IT ABOUT?The Black Body is an optional Hikvision accessory and allows you to improve accuracy when taking body measurements . Thermal cameras usually have a specific accuracy value. By correctly installing the Black Body in front of the camera , the accuracy will reach ± 0.3 ℃. It is also possible to install the black body on a tripod for more flexible movement management (accessories not included). To learn more ... read the dedicated Hikvision guide ! |
Download
Questions (0)
No customer questions for the moment.