The DS-3E1310HP-EI from Hikvision, is a managed network switch with 8 PoE ports (IEEE 802.3at/af/bt) and 2 Gigabit RJ45 uplink ports - 6kV lightning protection - 16K MAC TAble Size - 9.2Gbps switching capacity - 300m transmission distance for ports 1-8 - IP40 protection - Hi-PoE on ports 1-2 - PoE Watchdog - Made of metal - For wall or desk mounting - High quality product.
€172.68
€411.14 -58%
NETWORK SWITCH 8 ETHERNET POE PORTS 100MBPS (INCLUDING 2 HI-POE) - 2 UPLINK RJ45 GIGABIT PORTS - HIKVISION - DS-3E1310HP-EI
Managed ethernet switch - Hikvision - DS-3E1310HP-EI
8 PoE Ports 100 Mbps - 2 Gigabit RJ45 Ports - Mac Address 16K - Switching Capacity 9.2Gbps - Metal Fabrication - 6KV Lightning Protection - IP40 Protection - Digital signal transmission supported up to 300m - AF/AT cameras can reach the 300m range in extended mode - Hi-PoE on ports 1 and 2 - Ideal for configuring and managing video surveillance systems - Equipped with PoE Watchdog system.
Product details
- Manageable network switch - HIKVISION - DS-3E1310HP-EI
- 8 PoE 100Mbps Ethernet ports
- 2 Gigabit RJ45 ports
- Hi-PoE on port 1 and 2
- Supported Standards: IEEE 802.3at/af/bt
- Metal
- PoE Watchdog
- IP40 protection
- 6KV lightning protection
- Data transmission up to 300m
- MAC Table Size: 16K
- 9.2Gbps switching capacity
- For wall or desk mounting
- Power: 54 VDC, 2.22 A
- Dimensions: 217.6mm × 27.8mm × 103.35mm
- Weight: 0.550 kg
- Operating temperature: 0°C to 40°C
Data sheet
| DS-3E1310HP-EI | ||
Network Parameters | Ports | 8 × 10/100Mbps PoE port, 2 × Gigabit RJ45 port |
MAC Address Table | 16K | |
Switching Capacity | 9.2Gbps | |
Packets Forwarding Installments | 6.84 Mpps | |
Internal Cache | 4 Mbits | |
PoE Power Supply | Standard PoE | IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt |
PoE Power Pin | 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) | |
PoE Port | Hi-PoE: Ports 1 to 2, PoE: Ports 3 to 8 | |
Max. Port Power | 90W | |
PoE Power Budget | 110W | |
Software Function | Long Range | Ports 1 to 8: up to 300 m. Long range performance may vary depending on camera model or cable condition. |
PoE Watchdog | Ports 1 to 8: auto detect and restart the cameras that do not respond. | |
HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. | |
|
System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. | |
Storm Control | Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. | |
Supports port rate limiting based on broadcast, multicast, and unknown unicast packets. | ||
QoS | QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode. | |
DHCP Snooping | DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through Off by default. | |
Loops Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. | |
VLANs | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. VLAN. | |
Port Rate Limiting | Port rate-limiting is used for port bandwidth adjustment to prevent network congestion. | |
General | Shell | Metal material, IP40 |
Net Weight | 0.550 kg (1.21 lb) | |
Gross Weight | 0.950 kg (2.09 lb) | |
Dimensions (W × H × D) | 217.6 mm × 27.8 mm × 103.35 mm (8.56" × 1.09" × 4.06") | |
Operating Temperatures | 0°C to 40°C (0°F to 104°F) | |
Storage Temperatures | -40°C to 85°C (-40°F to 185°F) | |
Operating Humidity | 5% to 95% (no condensation) | |
Relative Humidity | 5% to 95% (no condensation) | |
Power Supply | 54 VDC, 2.22 A | |
Installation Modes | Desk-Mounted; Wall Mounted; | |
Max. Power Consumption | 120W | |
Power Consumption in Idle | 4W | |
Surge Protection | 6 KV | |
Approval | EMC | FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); |
IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32:2015) | ||
Safety | UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011 +A2: 2013, EN 62368-1: 2014+A11: 2017) | |
Chemistry | CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006) |
Further details
Downloads
Questions (0)
No customer questions for the moment.