The DS-3E1506P-EI from Hikvision, is a managed network switch with 4 Gigabit PoE Ports (IEEE 802.3at/af) and 2 Gigabit RJ45 Ports - 6kV Lightning Protection - MAC TAble Size 2K - Switching Capability 14Gbps - Internal Cache 1Mbits - Packet Forward Rate 10.42Mbps - Transmission distance 300m - Metal - For wall or desk mounting - PoE Watchdog.
€78.40
€186.66 -58%
MANAGED NETWORK SWITCH - 4 ETHERNET POE GIGABIT PORTS - 2 GIGABIT RJ45 PORTS - POE WATCHDOG - TRANSMISSIONS UP TO 300M - HIKVISION - DS-3E1506P-EI
Managed ethernet switch - Hikvision - DS-3E1506P-EI
4 Gigabit PoE Ports - 2 Gigabit RJ45 Ports - 2K MAC Address - 14Gbps switching capacity - Packet Forward Rate: 10.42 Mpps - 6KV lightning protection - Digital signal transmission supported up to 300m - 1Mbits internal cache - Ideal for configuration and management of video surveillance systems - Case made of metal - Ideal for wall or desk mounting.
Product details
- Network Switch - Managed - HIKVISION - DS-3E1506P-EI
- 4 Gigabit PoE Ethernet ports
- 2 Gigabit RJ45 ports
- Supported Standards: IEEE 802.3at/af
- 6KV lightning protection
- Data transmission up to 300m
- MAC Table Size: 2K
- 14Gbps switching capacity
- Packet Forward Rate: 10.42Mbps
- Internal cache: 1Mbit
- For wall or desk mounting
- Power supply: 54 V DC, 1.2 A
- Dimensions: 121.1mm × 27.6mm × 83.1mm
- Metal case
- Weight: 0.27kg
- Operating temperature: 0°C to 40°C
Data sheet
| DS-3E1506P-EI | ||
Network Parameters | Ports | 4 × Gigabit PoE port,2 × Gigabit RJ45 port |
MAC Address Table | 2K | |
Switching Capacity | 14Gbps | |
Packet Forwarding Rate | 10.42 Mpps | |
Internal Cache | 1 Mbits | |
PoE Power Supply | Standard PoE | IEEE 802.3af,IEEE 802.3at |
PoE Power Pin | End-span: 1/2(-), 3/6(+) | |
PoE Port | PoE: Ports 1 to 4 | |
Max. Port Power | 30W | |
PoE Power Budget | 60W | |
Software Function | Long Range | Ports 1 to 4: up to 300 m. Long range performance may vary depending on camera model or cable condition. |
Port Isolation | Ports 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. | |
PoE Watchdog | Ports 1 to 4: auto detect and restart the cameras that do not respond. | |
Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 2 aggregation groups. | |
Loop Prevention |
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. | |
VLANs | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLANs. | |
HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. | |
System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. | |
Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. | ||
General | Shell | Metal material |
Net Weight | 0.27 kg (0.6 lb) | |
Gross Weight | 0.77 kg (1.7 lb) | |
Dimensions (W × H × D) | 121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'') | |
Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) | |
Storage Temperatures | -40 °C to 85 °C (-40 °F to 185 °F) | |
Operating Humidity | 5% to 95% (no condensation) | |
Relative Humidity | 5% to 95% (no condensation) | |
Power Supply | 54V DC, 1.2A | |
Installation Mode | Desk-Mounted,Wall-Mounted | |
Max. Power Consumption | 65W | |
Power Consumption at Idle | 1.6W | |
Surge Protection | 6kV | |
Approval | EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1:2014 (Second Edition) | |
Chemistry | Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU),CE-RoHS (2011/65/EU) |
Further details
Downloads
Questions (0)
No customer questions for the moment.